Features
● 45°inclined carriage bed guideway ensureshigh rigidity during turning operation.
● High precision cartridge type spindle isequipped with imported P4-class spindle bearing
● Two axis of feed used large pitchball screw bearings,adopted with special support bearings,screw transmission atgood accuracy and high precision.
● Horizontal turret from Taiwan couldchange the tool fast in a shortest path with high repeatability;machining timeis saved.
● The rear or side mounted coolant tankensures fluent chip disposal and easy chip removal.
● Fully enclosed protection, transportedtype operation panel,safe and convenient to operate.
Standard equipment
●Controlsystem：GSK988TA
●Spindlebearing：Importedhigh precision bearing
●Mainmotor：GSK servomotor
●Feedmotor：GSK servomotor
●Guideway：Precision linear guideway from Taiwan
●Screw:Precision ball screw from Taiwan
●Screwbearing：Bearingespecially for screw
●Cylinder：Domestic hollow hydraulic rotating cylinder
●Chuck：Domestic hollow hydraulic 3-jaw chuck
●Turret：Horizontal hydraulic turret from Taiwan
●Tailstock:Hydraulic tail stock
●Chip:Rear chip
Optional equipment
●FANUC/KND/SYNETECsystem
●Automaticpneumatic door device
●Hydraulicrotating cylinder from Taiwan
●Hydraulic3-jaw chuck from Taiwan
●Automaticchip conveyor
Technical data
| Item | Unit | CK6560/750 |
| Capacity | Max. swing dia. over bed | mm | Φ500 |
| Max. swing dia. over slide | mm | Φ360 |
| Max. machining dia. | mm | Φ316 |
| Max. machining length | mm | 550 |
| Max. bar dia. | mm | Φ50 |
| Spindle | Thru-hole of spindle | mm | Φ62 |
| Type of spindle head | | A2-6 |
| Taper of spindle bore | | MetricΦ68 1:20 |
| Max.speed of spindle | rpm | 3500 |
| Chuck dia. | inch | 8” |
| Feed | Travel X/Z | mm | 230/670 |
| Dia. × pitch of screw X/Z | mm | Φ40×10/Φ40×10 |
| Rapid traverse X/Z | m/min | 18/16 |
| Turret | Type of turret | | Hydraulic horizontal |
| Number of stations | pcs | 2 |
| Center height of turret | mm | 100 |
| Tool specification：turning/boring | mm | 25x25/Φ40 |
| Tailstock | Dia./travel of quill | mm | Φ90/140 |
| Taper of quill bore | | MT No.5 |
| Type of sleeve drive | | Hydraulic |
| Movement of tailstock | | Manual |
| Motor | Power of spindle motor | kW | 15/18.5 |
| Torque of spindle motor | Nm | 95/118 |
| Power of motor X/Z | kW | 3.9/3.9 |
| Torque of motor X/Z | Nm | 15/15 |
| Power of coolant pump motor | W | 370 |
| Other | CNC controller | | GSK988TA |
| Power capacity | KVA | 20 |
| Type of bed | | 45° |
| Type of guideway | | Roller guideway |
| Net/gross weight of machine | kg | 4020/4460 |
| Dimension of machine（L x W x H） | mm | 3215x1770x1800 |
| Dimension of packing box（L x W x H) | mm | 3515x2202x2480 |
